TYPICAL APPLICATIONS

1. Matching the ordinary bench type Brinell hardness tester in lab
2. Matching the frame type Brinell hardness tester for large workpiece
3. Matching K-3000B hardness tester for moveable measurement
4. KINGINDENT K-3000B hardness tester test at any directions

1.KDT-10M can be used matching any kinds of hardness testers in lab.

KINGINDENT® Brinell indention tester can match any kind of Brinell hardness tester. As an independent measurement system, it can measure the Brinell indention accurately，quickly，reliably and movably. It is a new measuring method by using CCD camera to capture the indention image, instead of reading diameter from optical microscope by operator then calculating.

2.When testing on the large work pieces by the frame type Brinell hardness tester, it will have much more efficiency instead of optical microscope.

3.Take the tester to the metal, not the metal to the tester. Can be used in virtually any position: right side up, upside down or sideways. It is the best way for moveable Brinell hardness testing.

Testing with large workpiece

Testing with fixed structure

Large axis need a chain adapter

Metal plate can be clamp between the indenter and anvil when testing. The Max space is up to 350mm.

Metal plate can be clamp between the indenter and anvil when testing. The Max space is up to 350mm.

4.KINGINDENT K-3000B hardness tester test at any directions

Testing at any directions with fixed structure

Testing at any directions with fixed structure

Testing at any directions with fixed structure